ین ریموت قابلیت این را دارد که  به عنوان 4 تا ریموت 4 کانال مورد استفاده قرار گیرد

و برای مکان هایی که مجبور به استفاده از چند عدد ریموت هستید مورد استفاده قرار میگیرد و قابلیت کپی کد شدن را نیز دارد

frequency :

300mhz , 303.8 , 306mhz , 310 mhz , 315 mhz , 315.5 mhz , 330mhz , 360mhz , 390mhz , 418mhz , 430.5mhz , 433.42mhz , 433.92mhz , 868.35mhz ,  286-361mhz , 384-400mhz 

suitable to copy 99% fixed cod & lerning cod remote control on market .

active the duplicator and channel switching .

press the confirm key and the current channel number will be shown on screen which indicates the duplicator was activated . the duplicator will into standby mode without action within 10s . there are 4 channels totally and the channel number will be cyclic switching by pressing the confirm key .

programming steps :

1 , memory clearance :

turn on the duplicator , press the up & down key simultaneous till channel number flash 3 times , then release one button and press it 3 times quickly , keep pressing the other button (channel # flashes continuously )

2 , duplicating :

press the duplicator button and the screen will show channel number with dot . (for example 1 )

and stay on indicates this button into copy mode , press and hold the orginal remote control button and put it next to duplicator , after saving , channel #withe dot flashed (for example 1 ) 2 times and back to current channel .

3 , code recovery :

activate the duplicator and press button left and right simultaneous till channel # flashes , memory recovered .

4 , channel saving :

there are 4 channels in total , if want to keep less channel , pleas activate the duplicator , press confirm key and hold for 10s till u shown on screen , keep pressing confirm button and press down key and release both , the screen will read 4 and press down key to choose how many channel want to save , press confirm button to confirm and quit .

remarks :

 1 , when doing the duplicating , please keeps the original remote control a bit away from the duplicator and moves the original remote control close to te duplicator slowly .

2 , if original remote control is lower power and too close to duplicator , the duplicating will take longer time .

3 , if fail at the first time , please release the button and repeat the duplicating step .

4 , if not success , please double check the frequency of original remote control .